
IPCAM-EXT
■ External or internal use
■ Day/night 20m IR coverage
■ System software included
Image Sensor 1/3” Sony CCD
Video Compression MPEG4
Video Streams 2
No. of Effective Pixels NTSC: 510(H) * 492(V)
PAL: 500(H) * 582(V)
Resolution 176 x 120, 352 x 240, 720 x 480
Frame Rate Up to 30 FPS in all resolution
Min. Illumination 0 .5 Lux, 50 IRE, F1.4
Gamma 0.45
S/N Ratio >48 dB
Sync. Mode Internal Sync
Scanning System 2:1 Interlace
Shutter Control NTSC: 1/60-1/100,000 sec.
PAL: 1/50-1/100,000 sec.
BNC Video Output Composite Video 1.0Vpp. 75 ohm
Night Mode Auto
White Balance ATW
IR LED Quantity 28
IR LED Peak Wavelength 850 nm
IR LED Radiant Distance 20 meters
Power Supply 12V DC
Power Consumption 18W
Audio Audio Streaming
Audio Input/Output
Lens Standard 6.0mm board lens
Lens Optional 8mm
Dimensions (mm) 118(L) x 78(Ø)
Weight 0.45 kg
Ingress Protection Rating IP66
Operating Temperature -10°C ~ +60°C
14
I P C A M E R A S
IPCAM-DOME
■ Internal use
■ Low profile
■ System software included
Image Sensor 1/3” Sony CCD
Effective No. of Pixels NTSC:510(H)*492(V)
PAL:500(H)*582(V)
Video Compression MPEG4
Video Streams 2
Resolution 176x120, 352x240, 720x480
Frame Rate Up to 30FPS in all resolution
Min. Illumination 0.3 Lux, F1.2
Gamma 0.45
S/N Ratio >48 dB
Sync. Mode Internal Sync
Scanning System 2:1 Interlace
Shutter Control NTSC: 1/60-1/100,000 sec.
PAL: 1/50-1/100,000 sec.
BNC Video Output 1.0Vpp.75ohm
Night Mode Auto
Auto Electronics Shutter ON
Auto Gain Control ON
Back Light Compensation ON
White Balance ATW
Power Supply DC12V
Power Consumption 3.6W
Lens Standard 3.6mm Board Lens (standard)
Lens Optional 4.0/6.0/8.0 mm Board Lens
Lens Dimensions (mm) 82.6(H) x 117.5(Ø)
Weight 0.5kg
Operating Temperature -10ºc to 60ºc
IP (internet protocol) cameras have been successfully integrated into the world of CCTV for a number of years. They offer an
unbeatable solution for users requiring an effective remote viewing capability across the globe using their existing IT
facilities. To date the installer has required a level of IT knowledge to create a stable connection that copes with the
computer networks in built anti virus security.
T
he new IP cams put the world of IP CCTV in the hands of the relative novice. There’s no need for port forwarding, router
configuration or firewall opening. As with many of ESPs products the IPcams are very much plug and play.
Within minutes a remote viewing, recording IP based CCTV system is created. The software will allow connection and
recording of up to 32 cameras. The attractive user interface allows separate image control , motion record settings and of
course viewing of all cameras simultaneously. There’s even control capability of the wire free IPCAMPT pan and tilt unit.
Plug the camera into a spare port on
the back of the broadband router.
Load and launch the software on any
computer which has network or
i
nternet access.
Then simply enter the unique
registration code of the camera to
c
omplete the linking process.
Easy 3 step configuration
Comentarios a estos manuales