ESP EZ-WF Guía de instalación descargar pdf (Pagina 20)

NOTE: Do not allow product to become damp or wet while rolled in sealed bag

Do not set product directly on wet or uncured concrete.

: Aluminum is an electrical conductor. Please use caution when working around electrical sources

including overhead power lines. Carefully inspect electrical junction boxes and check for frayed

wires before beginning installation

Note: ESP Low-E® Attic Floor Insulation is designed for use in residential attic floor spaces only.

WARNING: Although ESP LOW-E Insulation Products are all fire tested to ASTM and/or NFPA standards; it is

recommended that they or any insulation material should not be exposed to open flame or other

ignition sources of sufficient intensity during shipment, storage or installation.

CAUTION

ESP LOW-E ATTIC FLOOR INSULATION

PRODUCT CODES: 4PMPA-SL, 24PMPA-SL

PRODUCT DIMENSIONS & DESCRIPTION

Double sided scrimless aluminum foil laminated to polyethylene foam perforated (1/8” nominal thickness)

WIDTH: 4’

LENGTH: 125’

R-Value*: R-5.5 down R-2.3 up

PERM RATING: ASTM E-96: 5.18 perms or 51.55 grams/ (day-m²)

CRITICAL RADIANT FLUX: ASTM E-970: > .12 w/cm² (no ignition)

EMITTANCE: ASTM C-1371 0.03

* R-value determined when placed over attic floor joist or existing insulation in joist area. R-value includes core

material value and low emittance air film value for upward and downward heat flow respectively. Specific R-values for specific applications

can be obtained from Install Guide at www.low-e.com or by contacting ESP, Inc. at 1-800-289-5693

Environmentally Safe Products, Inc.

313 W. Golden Ln. New Oxford, PA 17350

Toll Free: 1-800-289-5693 Fax: 717-624-7089

www low-e.com E-mail: [email protected]

Low-E Attic Floor Insulation

Reduces your carbon footprint.

Scan Code to See

Install Guide

“R means resistance to heat flow. The higher the R-value, the greater the insulating power.” “To get the marked R-Value, it is essential that this insulation be

installed properly. If you do it yourself, get instructions and follow them carefully. Instructions do not come with this package.” To obtain installation instructions

visit www.low-e.com or call 1-800-289-5693. Like a radiant barrier, Low-E products also block 97% of radiant heat.

“ESP, Inc strives to provide the most accurate R-value data

possible. The R-values set forth in this document are the

reflection of a combination of industry standard testing and

conscientious calculation. However, these numbers, even

within specific applications, can fluctuate due to the multiple

variables that influence R-value."

18.

YOUR EVERYDAY INSULATION SOLUTION

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

ESP EZ-WF Guía de instalación Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor ESP EZ-WF